SHERWIN WILLIAMS FC710 FINISH 1 CLEAR COAT KIT WITH MEDIUM HARDENER

Description

SHERWIN WILLIAMS FC710 FINISH 1 CLEAR COAT MEDIUM ACTIVATOR
FC710 is a 4.29 VOC high solids, urethane clearcoat designed for overall refinishing. This clearcoat works well in air dry or force dry environments and provide excellent gloss, DOI, leveling, blending, and buffing characteristics
1 Gallon
Mix
4:1 with hardener
Made in the USA
Substrates:
FC710 can be applied over Basecoats or cured Single-Stage Enamels
Application:
Apply 2 coats, allowing each coat to flash to hand-slick between coats or a wet-on-wet “limited flash” application can be used allowing a 2-5 minute flash between coats.
Adjust air pressure to: HVLP 8 - 10 psi, Conventional 50 – 60 psi
ReCoat
Basecoat: 10-15 minutes
Single-Stage Enamels: 8 hours to overnight dry
Clearcoat: Allow FC710 clearcoat to dry overnight, then scuff with 1000 grit and reapply clearcoat
Drying:
Air Dry Times at 70°F
Dust Free: 15 minutes
To Deliver: 4-6 hours
Force Dry: 15 minutes @120°F surface temperature
YOU GET 1 GALLON OF FC710 AND 1 QUART OF 612 (MEDIUM)
PLEASE SPECIFY ON CHECKOUT IF YOU NEED 611 HARDENER (FAST) OR 613 HARDENER (SLOW) INSTEAD OF 612 (MEDIUM)
PROVISION Auto Body Supply
Providing Quality to Professionals. Buy with confidence.