Polyurethane Clear Coat Show Auto Overall Automotive ClearCoat Gallon 2K miracle

Description

This is not a normal everyday Clear Coat.. we are comfortable to say that this Clear Coat is the best of its kind.withth Miracle Shine properties and buffing (when necessary), Power Puff Polyuretahno Ultimate Show Kar Klear Koat that’s is designed to impress and show off with. This Clear Coat was not to be released as a bang for your buck, a treasure item in your garage or body shop
Power Puff was designed with the highest level of automotive resin production in coordination between Top Quality Resins imported from Tokyo with Assembly in Hicao as per factory instruction.
This Clear Coat was designed as a better alternative to other Poly clears (Nason, FC720, Higher 4:1 Ppg Shopline and Omni Clears like JC620 and 630. Don’t let the affordability fool you, it is our mission to make all Lumena and Durashell products affordable to the biggest and tiniest shops. We want you to give your customer a clear coat he will thank you for multiple times without burning a whole in your pocket.
Through out the 30 years, our main task is to provide 100% virgin solvent, top quality mixes with most importantly transparency (crystal clear) . Any painter acknowledges that an adhesion promoter, or a Clear Coat that is yellowing can affect the tone for the color. Unless all our conditions are met, we assure you no product is advertised.
For the biggest question I answer on regular basis. Is this clear coat easy to buff? In a world were we are painting in perfect conditions like PPG or Akzonobel testing center, or any Reputable shop with high quality equipment like Gerber, Abra, Etc. there is absolutely no need to buff at all. buffing would actually be a waist of time and not productive.
Many of us do not have the luxury in painting in a Body Shop with A devilbliss spray booth, vaccuum sanding machines and professional respiarating system.
That’s why Lumena Power Puff is good for all conditions. This clear coat is made to amaze when wet sanding, buffing, polishing and waxing. It dries fast, though not as fast as our spot and panel version of this clear (EZ Dry Lumena Production Clear Coat)
If you are painting in harsh conditions or even on the floor or garage, we suggest you purchase our Lumena EZ Dry Production Clear Coat which is designed to have a little less solids but more flex and Accelerating agents to make the project easier at that setting. It is basically the (Spot and Panel) Version of this Clear Coat.
MIX RATIO
Combine the components by volume (4:1). Mix thoroughly prior to activation.
Component
Volume
Show Kar Klear TM 2K Urethane Multi-Panel 4 Clear Activator 1
Choose between medium or fast
POT LIFE
3 hours at 70°F (21°C)
SPRAY VISCOSITY
13-15 seconds in a
APPLICATION SUBSTRATES
Recommended for use over properly applied basecoats.
SURFACE PREPARATION
Clean all surfaces with Silicone and Wax Remover or Surface Cleaner. In regulated areas use locally permitted silicone and wax remover or surface cleaner.
GUN SETUP
Conventional & HVLP:
SPRAY PRESSURE
Conventional Gravity Feed:
HVLP:
APPLICATION
1.3-1.6 mm
30-40 PSI at the gun 8-10 PSI at the cap
Apply 2 medium wet coats. Flash 5-7 minutes between coats.
CLEANING OF PAINT EQUIPMENT
Clean spray equipment as soon as possible with lacquer thinner or low VOC cleaner in VOC
regulated markets.
DRY TIMES
AIR DRY
Out of dust: Tack free: To tape:
FORCE DRY
30 minutes at 140°F (60°C)
BUFFING:
15-30 minutes 1-2 hours Overnight
If force dried, wait 4-6 hours at 70°F (21°C) before buffing. If air dried, overnight dry recommended.
Remove dust with soft, dampened cloth and sand with 1500 grit and finer paper. Then polish with medium duty compound and finish with a soft polishing pad to remove any swirl marks. Operate at 1700-2000 RPM.
PHYSICAL PROPERTIES
All Values Ready To Spray
Max. VOC (LE):
Max. VOC (AP):
Avg. Gal. Wt.:
Avg. Wt.% Volatiles:
Avg. Wt.% Exempt Solvent: Avg. Wt.% Water:
Avg. Vol.% Exempt Solvent:
Avg. Vol.% Water:
Theoretical Coverage: Recommended Dry Film Thickness: Flash Point:
VOC REGULATED AREAS
4.3 lbs./gal (517 g/L) 3.1 lbs./gal (377 g/L) 7.79 lbs./gal (934 g/L) 63.2%
22.9%
0.0%
27.0%
0.0%
494 ft2 (45.9 m2) at 1 mil 2.0 mils in 2 coats
See MSDS/SDS
These directions refer to the use of products which may be restricted or require special mixing instructions in VOC regulated areas. Follow mixing usage and recommendations in the VOC Compliant Products Chart for your area.