Kearfott Corporation Aircraft Synchro, Control Transformer NSN 5990-00-504-8190

Description

Kearfott Corporation Aircraft Synchro, Control Transformer NSN 5990-00-705-4349
Export License Required
:
Critical Munitions List Item or Sensitive Commerce Control List Item
.
Please check our store frequently for new listings of NOS Military Surplus, we are sorting through
thousands of Military Surplus Items
and identifying and listing it as we can.
Body Material
STEEL, STAINLESS
Body Style
STANDARD ROUND B
Shoulder Diameter
1.0000 INCHES NOMINAL
Pilot Diameter
0.5000 INCHES NOMINAL
Overall Length
2.2030 INCHES MAXIMUM
Flange Diameter
1.0630 INCHES NOMINAL
Flange Thickness
0.0620 INCHES NOMINAL
Undercut Width
0.0620 INCHES NOMINAL
Shaft Diameter
0.1200 INCHES NOMINAL SINGLE SHAFT
Shaft Length
0.3130 INCHES NOMINAL SINGLE SHAFT
Body Size
11
Stator Input Voltage Rating In Volts
26.0 NOMINAL
Stator Input Current Rating
930.0 MILLIAMPERES NOMINAL
Stator Input Electrical Power Rating
490.0 MILLIWATTS NOMINAL
Frequency In Hertz
400.0 NOMINAL
Zro Impedance Magnitude In Ohms
431.74 NOMINAL
Zro Impedance Angle In Deg
76.60 NOMINAL
Zso Impedance Magnitude In Ohms
72.03 NOMINAL
Zso Impedance Angle In Deg
76.35 NOMINAL
Rotor Dc Resistance In Ohms
55.00 NOMINAL
Stator Dc Resistance In Ohms
112.00 NOMINAL
Phase Shift Angle In Deg
6.500 INPUT TO OUTPUT NOMINAL
Actuator Friction Torque At Minus 55 Deg Celsius
15.0 CENTIMETER-GRAMS NOMINAL
Actuator Friction Torque At Plus 25 Deg Celsius
4.0 CENTIMETER-GRAMS NOMINAL
Shaft Radial Play Test Point
0.125 INCHES NOMINAL
Shaft Maximum Radial Play
0.0005 INCHES
Pilot Length
0.0620 NOMINAL INCHES
Shoulder Length
0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS
Mounting Surface To Terminal End Distance
1.8040 INCHES MAXIMUM
Terminal Location
REAR
Shaft Slot Depth
0.0300 INCHES NOMINAL SINGLE SHAFT
Shaft Slot Width
0.0250 INCHES NOMINAL SINGLE SHAFT
Shaft Type
ROUND, SLOTTED SINGLE SHAFT
Shaft Radial Play Determining Weight
4.0 OUNCES
Test Data Document
97151-8712808 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
Terminal Type And Quantity
5 WIRE LEAD