For 2016 2017 18 Chevy Malibu Front Bumper Cover & Front Upper and Lower Grille

Description

Front Bumper Cover & Front Upper and Lower Grille
For 2016 2017 2018 Chevy Malibu
If you have any questions, please feel free to contact us
Package includes :
Front Bumper Cover x 1
Front Upper Grille x 1
Front Lower Grille x 1
Fitment :
For 2016 2017 2018 Chevrolet Cruze
**Front Grille Grill**
Color : Chrome & Black Position : Front Upper & Lower Material :
ABS Plastic /Polycarbonate Lens.Made from high grade OE comparable materials to withstand rough road wear and the test of time. Installation :
For 2016 2017 18 Chevy Malibu Front Bumper Cover & Front Upper and Lower Grille
Front Bumper Cover & Front Upper and Lower Grille
For 2016 2017 2018 Chevy Malibu
If you have any questions, please feel free to contact us
Package includes :
Front Bumper Cover x 1
Front Upper Grille x 1
Front Lower Grille x 1
Fitment :
For 2016 2017 2018
Chevrolet Cruze
**Front Grille Grill**
Color :
Chrome & Black
Position :
Front Upper & Lower
Material :
ABS Plastic /Polycarbonate Lens.Made from high grade OE comparable materials to withstand rough road wear and the test of time.
Installation :
Direct bolt-on replacement. No modification required. Product does not come with installation instructions, please refer to a shop/factory manual for installation.
**Front Bumper Cover**
Reminder:
1:Take extra care when using a blade or knife to open the packaging to avoid accidentally damaging the surface of your bumper cover.
2: If you see any minor scuffs, don’t worry—your bumper cover comes pre-primed for protection and should be scuffed completely before applying your chosen primer and paint.
Note:
Folding our bumper covers to help you enjoy savings on shipping costs. When you recieve the bumper covers, you need unfold your bumper cover.Here’s a step by step guide on how to unpack, unfold：
Outdoor Method:
1. Find a spot that gets a lot of direct sunlight (it will need to be in the sun for up to 4 hours).
2. Open the packaging and remove the bumper cover.
3. Arrange the cardboard packaging to lie flat on the ground. This will serve as a clean surface for your bumper cover.
4. Let the bumper cover sit in the sunlight for three hours.
5. Once you hit the three-hour mark, reposition the bumper cover so that the front part is facing the floor. Leave it in this position for the remaining hour.
Indoor Method:
1.Use the cardboard packaging as your work surface and place the bumper cover on top.
2.Look for creased areas on the bumper cover. Apply heat to those areas with the heat gun.
3.Avoid pointing the heat gun at one spot for too long, as excessive heat can distort or melt the plastic. Keep the gun moving to spread the heat evenly across the surface of the bumper cover.
4.Once the last patch of creased plastic is straightened out, you can consider the bumper cover fully unfolded.
Item Specifics
UPC
Does not apply
Brand
Silscvtt
Manufacturer Part Number
PO381500LT
Type
Bumper Cover & Front Grille
Placement on Vehicle
Front , Upper , Lower
Color
Black and Chrome
Material
ABS Plastic
Warranty
1 Year
Fitment Type
Direct Replacement
Bumper Surface Finish
Primered
Grille Surface Finish
Chrome
Package Includes
(1) Bumper Cover, and (1) Upper Grille, and (1) Lower Grille
Condition
New
Bumper Cover Parking aid sensor holes
WITH PARK ASSIST SENSOR HOLES
Payment
We accept payment via PayPal.
Shipping will be arranged within 3 business day once payment is cleared.
Shipping
All orders and payments received will be shipped  within 3 business day.
No shipping on Weekends or US Public Holidays.
Return and Refund Policy
1. We stand behind our items and offer warranty. All items are in new and working condition unless specified otherwise elsewhere in the description.
2. All Returns - defective or otherwise - MUST BE PREAUTHORIZED to guarantee refund or exchange. Please contact us to get an authorization and return address.
3. Replacement or Refund will be made upon receipt of the returned item. Please include tracking number so we can process ASAP. If you do not wish to wait for a replacement, please repurchase the item.
4. ALL REFUNDS will be processed via PayPal. Please double check via PayPal history and transaction for confirmation.
Feedback
We strive to provide the best products and services. Your positive feedback 5 stars DSR help us do better. If anything about your transaction did not meet expectations, please CONTACT US and give us the opportunity to make things right. We are always here to help.
Help - Customer Support - Contac
Please do not hesitate to CONTACT US. You can message 24/7 on eBay for all questions and inquiries. We will get back to you within 1business days at the latest.
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Suspension
Lighting & Lamps
◈  Fog Lights
◈  Headlight
◈  Brake Lights
◈  Moto Lighting & Lamps
◈  Others
Carburetor
◈  Motorcycle Carburetor
◈  ATV Carburetor
◈  Automobile Carburetor
◈  Others
Boat
◈  Others
Control Arms & Parts
Auto Valve
◈  Pressure Relief Valve
◈  Transmission Solenoids
◈  Control Valve
◈  EGR Valve
◈  Selector Valve
Fule Injector
Brakes & Brake Parts
◈  Others
Car Repair Kit
Auto Engine System
◈  Engine Timing Cover
◈  Hydraulic Roller
◈  Valve Cover Breather
◈  Others
Auto Ignition System
◈  Spark Plug Protective Cover
◈  Ignition Switch
◈  Others
Auto Hub
◈  Hub Bearing
Auto Actuator
◈  Air Conditioner Actuator
◈  Door Lock Actuator
◈  Hood Catch
◈  Fuel Door Opener Actuator
◈  Others
Auto Inlet & Outlet System
◈  Intake Exhaust Valves
◈  Exhaust And Intake Pipes
◈  Turbocharger
◈  Others
Transmission System
◈  Chain
◈  Shaft
◈  Gear
◈  Tensioner
Auto Switch
◈  Others
Motorcycle Control System
◈  Others
Auto Sensor
◈  TPMS Sensor
◈  Oxygen Sensor
◈  Knock (Detonation) Sensor
◈  Throttle Position Sensor (TPS)
◈  Vehicle Speed Sensor
◈  Others
Auto Interior
◈  Plastic Rivets Fasteners
◈  Trunk Shield
◈  Inside Door Handle
◈  Inner Door Panel Handle
◈  Air Conditioner Vent
◈  Others
Exterior Trimming Parts
◈  Roof Rack
◈  Running Boards/Side Steps
◈  Bmuper Grille
◈  Fender Flares
◈  Door Handle
◈  Fuel tank cap
◈  Hinge
◈  Front Bumper
◈  Rear Bumper
◈  Motorcycle Decoration
◈  Others
◈  Windshield Wiper Blades
◈  Window Visors
◈  Car Cover
◈  Car mirror
◈  Trunk Spoiler Wing
◈  Front Spoiler Lip
◈  Tool Boxes
◈  Front bumper trim
◈  Auto body trim panel
Auto Pump
◈  Fuel Pump
◈  Others
Other
Hot Item
4PC Smoke Window Vent Visor Rain Guard Deflector for 2009-2013 Toyota Corolla
USD 24.19
New Cylinder Head Solenoid Gasket VTEC for Honda 15815R70A01，15845R70A01
USD 5.00
New Non Locking Fuel Filler Gas Cap with Tether For Jeep Chrysler Dodge Plymouth
USD 9.69
Front Bumper Grill Grille Matte Black Angry Bird For Jeep Wrangler TJ 1997-2006
USD 58.99
Window Vent Visors For 02-08 Ram 1500 03-09 2500/3500 Quad/Crew Cab Deflector US
USD 28.99
Excellent Delivery
New List Item
Front Bumper Lip Spoiler For 2014 2015 2016 2017 2018 MAZDA 3 Alexa Gloss Black
USD 37.42
Premium For RV Trailer Waterproof Cover Folding Pop Up Camper 14-16 FT
USD 163.89
Oil Filler Tube Seal Cap Set Kit 3921644 4962608 For Dodge 5.9L Cummins
USD 12.09
For MERCEDES W204 C200 C250 C300 2007 - 2014 Diamond Style Silver Grill Grille
USD 87.46
For 14 15 16 17 Q50 AQ Style JDM Sport Rear Bumper Lip Spoiler Diffuser Splitter
USD 64.99
For 2016 2017 18 Chevy Malibu Front Bumper Cover & Front Upper and Lower Grille
Front Bumper Cover & Front Upper and Lower Grille
For 2016 2017 2018 Chevy Malibu
If you have any questions, please feel free to contact us
Package includes :
Front Bumper Cover x 1
Front Upper Grille x 1
Front Lower Grille x 1
Fitment :
For 2016 2017 2018
Chevrolet Cruze
**Front Grille Grill**
Color :
Chrome & Black
Position :
Front Upper & Lower
Material :
ABS Plastic /Polycarbonate Lens.Made from high grade OE comparable materials to withstand rough road wear and the test of time.
Installation :
Direct bolt-on replacement. No modification required. Product does not come with installation instructions, please refer to a shop/factory manual for installation.
**Front Bumper Cover**
Reminder:
1:Take extra care when using a blade or knife to open the packaging to avoid accidentally damaging the surface of your bumper cover.
2: If you see any minor scuffs, don’t worry—your bumper cover comes pre-primed for protection and should be scuffed completely before applying your chosen primer and paint.
Note:
Folding our bumper covers to help you enjoy savings on shipping costs. When you recieve the bumper covers, you need unfold your bumper cover.Here’s a step by step guide on how to unpack, unfold：
Outdoor Method:
1. Find a spot that gets a lot of direct sunlight (it will need to be in the sun for up to 4 hours).
2. Open the packaging and remove the bumper cover.
3. Arrange the cardboard packaging to lie flat on the ground. This will serve as a clean surface for your bumper cover.
4. Let the bumper cover sit in the sunlight for three hours.
5. Once you hit the three-hour mark, reposition the bumper cover so that the front part is facing the floor. Leave it in this position for the remaining hour.
Indoor Method:
1.Use the cardboard packaging as your work surface and place the bumper cover on top.
2.Look for creased areas on the bumper cover. Apply heat to those areas with the heat gun.
3.Avoid pointing the heat gun at one spot for too long, as excessive heat can distort or melt the plastic. Keep the gun moving to spread the heat evenly across the surface of the bumper cover.
4.Once the last patch of creased plastic is straightened out, you can consider the bumper cover fully unfolded.
Payment
Shipping
Return and Refund Policy
Feedback
Help - Customer Support - Contac
We accept payment via PayPal.
Shipping will be arranged within 3 business day once payment is cleared.
All orders and payments received will be shipped  within 3 business day.
No shipping on Weekends or US Public Holidays.
1. We stand behind our items and offer warranty. All items are in new and working condition unless specified otherwise elsewhere in the description.
2. All Returns - defective or otherwise - MUST BE PREAUTHORIZED to guarantee refund or exchange. Please contact us to get an authorization and return address.
3. Replacement or Refund will be made upon receipt of the returned item. Please include tracking number so we can process ASAP. If you do not wish to wait for a replacement, please repurchase the item.
4. ALL REFUNDS will be processed via PayPal. Please double check via PayPal history and transaction for confirmation.
We strive to provide the best products and services. Your positive feedback 5 stars DSR help us do better. If anything about your transaction did not meet expectations, please CONTACT US and give us the opportunity to make things right. We are always here to help.
Please do not hesitate to CONTACT US. You can message 24/7 on eBay for all questions and inquiries. We will get back to you within 1business days at the latest.
All rights reserved.